How does hexamine affect the body

Seek medical attention if pain persists. In the event of skin exposure; remove all contaminated clothing, footwear and accessories and cleanse the affected area with plenty of soap and water.

Contaminated clothing must be washed prior to wearing again. Seek medical attention if irritation occurs. If hexamine dust is inhaled, remove the person from the contaminated area and encourage the patient to blow their nose to ensure a clear passage for breathing.

If irritation persists, seek medical attention. In the event of ingestion, vomiting should not be induced. If vomiting occurs, lean the patient forward or place them on their left side to maintain an open airway and to prevent aspiration.

Observe the patient and seek medical advice. Safety showers and emergency eyewash fountains should be accessible in the immediate area of the potential exposure to the chemical. Ensure the area has adequate ventilation and install local exhaust ventilation if necessary.

Wear proper PPE, such as safety glasses with side shields, chemical goggles, gloves, overalls, aprons, and respirators.

Some plastic PPE is not recommended when handling hexamine, as they may produce static electricity. Effects of short-term exposure The substance is mildly irritating to the eyes and skin. Effects of long-term or repeated exposure Repeated or prolonged contact may cause skin sensitization. Repeated or prolonged inhalation may cause asthma. MAK: sensitization of skin SH. The substance may release formaldehyde. See ICSC Anyone who has shown symptoms of asthma due to this substance should avoid all further contact.

The symptoms of asthma often do not become manifest until a few hours have passed and they are aggravated by physical effort. Rest and medical observation are therefore essential. All rights reserved. The published material is being distributed without warranty of any kind, either expressed or implied. If appropriate, moisten first to prevent dusting. Wash away remainder with plenty of water. Physical dangers Dust explosion possible if in powder or granular form, mixed with air.

Chemical dangers Decomposes on heating and on burning. This produces toxic and corrosive gases including formaldehyde, ammonia, hydrogen cyanide and nitrogen oxides. The solution in water is a weak base. Reacts with strong oxidants and strong acids. Attacks aluminium and zinc. Formula: C 6 H 1 2 N 4 Molecular mass: Routes of exposure The substance can be absorbed into the body by inhalation of its aerosol and by ingestion.

Effects of short-term exposure The substance is mildly irritating to the eyes and skin.